Attaching the Guide Scope :The 50mm Multi-Use Guide Scope’s mounting bracket has a Vixenstyle dovetail bar that can be mounted to your telescope in different ways. First, it fits the standard dovetail finder scope base included on many telescopes. Simply slide it into the dovetail base, then tighten the thumbscrew on the base to secure the guide scope in place. The bracket’s dovetail bar has one ¼"-20 (center) for attachment to an optional universal dovetail plate. In the guidescope is mounted on a telescope. |
Another method of attachment :Another method of attachment is to bolt the guide scope bracket to an optional universal dovetail plate, which you mount on top of your telescope. The mounting bar has three threaded through-holes: the center hole has ¼"-20 threads. To attach the guide scope bracket to a universal dovetail plate, one way would be to insert a ¼"-20 socket head capscrew of proper length up through the dovetail plate and into the center hole of the bracket’s dovetail bar. Tighten the bolt firmly with an Allen wren-ch. Then install the universal plate onto your telescope’s tube rings or radius blocks. |
Aiming the 50mm Guide Scope :The 50mm Multi-Use Guide Scope is mounted in a dual-ring aluminum bracket that has six nylon-tipped thumbscrews to secure the guide scope in place. Although you may never need to do it in order to find a guide star, you can adjust the direction the guide scope is pointed within the bracket by alternately loosening and tightening the three thumbscrews on the front or back ring (usually you won’t need to make adjustments on both rings). Just make sure that all six thumbscrews are tightened before you begin guiding. Do not over-tighten them, however, or you could strip the screw threads! |
Copyright © 2005-2021 Astromania Co., Ltd. All Rights Reserved. POWERED BY UEESHOP
Copyright © 2005-2021 Astromania Co., Ltd. All Rights Reserved. POWERED BY UEESHOP