The Newtonian reflector
The Newtonian reflector The Newtonian reflector is the classic mirror telescope design. The principle is straightforward yet ingenious. Isaac Newton first built this telescope in 1668. Actually, Newton was further developing an existing telescope design, as the physicist Zucchi had already constructed a telescope in 1616 which employed a mirror. Newton's idea was to install a flat deflecting mirror into the telescope tube. Just imagine: A telescope that was originally designed in 1668 is still one of the most popular and best-selling amateur telescope designs today, in the age of smart phones and iPads! |
How a Newtonian telescope works: Light first enters the top of the telescope tube. At the lower end there is a primary mirror that is either spherical or parabolic in configuration. This mirror reflects the light back upwards. In order to prevent the image to be focused in front of the tube opening (and hence obscured by your head!), there is a secondary mirror inside the top of the tube. This is a plane mirror which deflects the light beam by 90°, hence directing it out the side of the tube. The light enters the focuser here, into an eyepiece can then be inserted for observing. Focusing takes place by turning a focus wheel on the focuser so that the eyepiece is moved towards or away from the telescope tube. |
The advantages As opposed to a lens telescope, a reflector has no lenses. This means that the problem of colour fringing around bright objects is avoided with Newtonian reflectors. But that is not the only criterion for producing a good image. Equally important are the quality and reflectance of the mirrors - which can be very different, depending on the telescope. It is hence important to rely on well-known brands. The aperture ratio of a telescope is the relationship between its aperture and focal length. A telescope with 100/1000mm has an aperture ratio of f/10. This means that the focal length is 10 times as large as the aperture. Newtonian reflectors come in a relatively wide range of aperture ratios. Whereas refractors tend to have smaller aperture ratios (e.g. f/10, to reduce chromatic aberration), Newtonian telescopes can confidently be designed with optics of up to f/4. This means that Newtonian telescopes are optically 'fast' and have relative short focal lengths. A major advantage with Newtonian telescopes is their affordable price. As compared to refractors and other telescope designs, such as Schmidt-Cassegrains, a Newtonian telescope is simply unbeatable in price. For relatively little money, you get optical performance for which you would have to pay significantly more for most other telescope designs. The disadvantages |
One disadvantage of Newtonian telescopes, as compared with refractors, is the shadow produced on the incident light by the secondary mirror. Depending on the size of the secondary mirror, a lesser amount of light gets to the eye than originally enters the telescope tube. This is also known as 'obstruction'. In comparison, a refractor has no components in the light beam's path and thus has no obstruction. This means that a refractor of a given aperture will always provide more light and more contrast than a reflector of the same size. But larger refractors are too expensive for |
most amateur astronomers and, from a certain size, are not even available as mass produced instruments. |